Resource Recycling
  • The Latest
  • Analysis
    • All
    • Certification Scorecard
    • Industry Announcements
    • Opinion

    Paladin is building a domestic recovery path for rare earths in steel scrap

    Re-Teck opens site in Southeast Asia

    ERI expands global footprint into Vietnam

    Michigan State Launches Center to Tackle Packaging Waste

    Inside the Circle: Put every package where it performs best

    SERI works to restore faith in certifications

    Building a defensible E-scrap evidence file

    EU flags in front of the European Commission's building.

    Europe’s electronics recovery market is moving upstream

    Maximizing the value of post-consumer PP 

    Maximizing the value of post-consumer PP 

  • Conferences
    • Resource Recycling Conference
    • Plastics Recycling Conference
    • E-Scrap: The Longevity Conference
    • Textiles Recovery Summit
  • Publications
    • E-Scrap News
    • Plastics Recycling Update
    • Policy Now
    • Resource Recycling
    • Other Topics
      • All Topics
      • Brand Owners
      • Critical Minerals
      • Glass
      • Grant Watch / RFPs
      • Markets
      • Organics
      • Packaging
      • Research
      • Technology
      • Textiles
Subscribe
No Result
View All Result
Resource Recycling
  • The Latest
  • Analysis
    • All
    • Certification Scorecard
    • Industry Announcements
    • Opinion

    Paladin is building a domestic recovery path for rare earths in steel scrap

    Re-Teck opens site in Southeast Asia

    ERI expands global footprint into Vietnam

    Michigan State Launches Center to Tackle Packaging Waste

    Inside the Circle: Put every package where it performs best

    SERI works to restore faith in certifications

    Building a defensible E-scrap evidence file

    EU flags in front of the European Commission's building.

    Europe’s electronics recovery market is moving upstream

    Maximizing the value of post-consumer PP 

    Maximizing the value of post-consumer PP 

  • Conferences
    • Resource Recycling Conference
    • Plastics Recycling Conference
    • E-Scrap: The Longevity Conference
    • Textiles Recovery Summit
  • Publications
    • E-Scrap News
    • Plastics Recycling Update
    • Policy Now
    • Resource Recycling
    • Other Topics
      • All Topics
      • Brand Owners
      • Critical Minerals
      • Glass
      • Grant Watch / RFPs
      • Markets
      • Organics
      • Packaging
      • Research
      • Technology
      • Textiles
Subscribe
No Result
View All Result
Resource Recycling
No Result
View All Result
Home Analysis Opinion

In My Opinion: Right to Repair is bound to succeed

byGay Gordon-Byrne, The Repair Association
July 25, 2019
in Opinion
In My Opinion: Right to Repair is bound to succeed

Twenty states officially filed variants of Right to Repair legislation in 2019. No bills have received a vote yet – which is normal and expected, given how hard it is to get all but the most trivial of bills passed.

Legislative passage is inevitable, but it isn’t easy with roughly $28 trillion in market cap arrayed in opposition. Despite this ludicrous imbalance of financial power, polling consistently shows 90% approval among consumers without any obvious socio-economic, partisan or geographic bias.

In short, Right to Repair is going to happen.

Right to Repair legislative efforts are also reaching critical mass in terms of legislative and staff experience. In addition to the 20 bills that were filed, there were another half-dozen that were in the works during legislative sessions this year. We know this because opposition lobbyists in Big Agriculture were publicly fighting to block the mere filing. Even if no new bills are introduced in 2020, the continuation of existing bills can easily carry legislation to success.

We really need just one bill to become law and the dominoes will fall quickly.

There are already more state legislators setting up to file bills in 2020 – proof that momentum continues to build in our direction. Right to Repair remains solidly non-partisan, as proven by the wide variety of politicians who have found common cause on this issue.

Returning bills have more co-sponsors, more majority party leadership support, and the bills are often brought by committee chairs. These factors make it easier to move bills in new sessions, because debunking opposition FUD (fear, uncertainty and doubt) takes time.

Legislators tend to believe lobbyists working for iconic brand names when they claim repair will harm consumers (it doesn’t), that repair will create new opportunities for cyber-theft (it doesn’t) and will somehow (bizarrely) harm the environment. It takes time to debunk these assertions, which always slows the first pass at bills. Our best prospects for passage are the oldest bills, where legislators no longer believe lobbyists and are often angry they have been misled. FUD tends to backfire.

More than one type of win

The raw tally of bills filed doesn’t reflect the close calls and near misses that are themselves victories.

Washington State passed a bill rapidly through the House Committee on Innovation, Technology & Economic Development and should have been called for a vote but for last minute interference by Microsoft. Legislation in California has been scuttled twice now by committee schedules being pulled at the last minute – leaving the bill sponsor even more determined than before.

In Illinois, we had expected lawmakers to want to exempt John Deere equipment in their bill, but the legislators themselves decided to include agricultural equipment. New Hampshire backers moved a Right to Repair bill quietly in the state’s Assembly, getting no media attention. That bill will most likely have a vote in January. Nebraska leaders should have moved the state’s Right to Repair legislation easily through their agricultural committee, but last minute flubs by the Nebraska Farm Bureau killed that effort before filing.

Meanwhile, bills in New York and Minnesota could have moved to the floor at the end of their legislative sessions but were derailed by the tyranny of time, not because they wouldn’t have passed. Legislative leaders triage every minute as session deadlines loom. That means lots of good bills, including ours, should be brought for voting early in 2020.

Looking forward to 2020, we know that legislators want to move Right to Repair bills, but also want to pick their battles. While repair is identical for electronics within any product, legislators like to exempt categories of equipment to satisfy opposition claims that the bill is “too broad.”

Some bills will be stripped of agricultural equipment, others of medical equipment. There will also likely be agriculture-only bills that don’t include consumer electronics. As a result, multiple state laws will likely be needed in order to fully include every type of product that contains a digital part.

Right to Repair momentum is also growing at the federal and international levels.

Starting in mid-July, the Federal Trade Commission (FTC) is poking into abuses of warranty and consumer protection law that have been thwarting repair. In 2018, the U.S. Copyright Office (USCO) removed the threat of copyright infringement for repair on all land-based motor vehicles, home appliances, IOT devices, and just about all mobile and computing equipment other than gaming stations.

Looking at the foreign scene, two Canadian provinces have filed Right to Repair bills so far, and  Australia and New Zealand are starting their own efforts. Regulatory action in the EU has been driving standards for better design for repair, particularly for home appliances and other large energy-using equipment such as servers and lighting.

We’re all pointing in the same direction. And this increasingly global inertia around the issue underscores the fact that soon enough Right to Repair is going to move from idea to actual law.

Gay Gordon-Byrne serves as executive director of The Repair Association.

The views and opinions expressed are those of the author and do not imply endorsement by Resource Recycling, Inc. If you have a subject you wish to cover in an op-ed, please send a short proposal to news@resource-recycling.com for consideration.

 

Tags: Legislation & EnforcementRepair & Reuse
TweetShare
Gay Gordon-Byrne, The Repair Association

Gay Gordon-Byrne, The Repair Association

Related Posts

Audit finds recycling deficiencies across NY

byPaul Lane
August 11, 2026

The state comptroller found inaccuracies and omissions have made it impossible to accurately report how much material is recycled statewide.

Ron Gonen

Bicameral Truth in Labeling Act introduced in Congress

byStefanie Valentic
August 10, 2026

A new bill would set federal recyclability, compostability, reuse and refill standards and make false claims an FTC-enforceable offense.

Michigan State Launches Center to Tackle Packaging Waste

Inside the Circle: Put every package where it performs best

byBill Shireman
August 10, 2026

Not every package belongs in the same recovery program; here’s a better way forward.

A Republic Services truck picks up a recycling cart in Fort Collins, Colorado.

Fort Collins, CO builds a roadmap to zero waste

byKeith Loria
August 6, 2026

The midsize city has big ambitions on waste reduction and is working with partners to advance its goals.

Summing up California container deposit changes

Connecticut’s container redemption rate soars 27%

byStefanie Valentic
August 5, 2026

Connecticut's redemption rate jumped 27% in a year, while most other deposit states remained flat.

Revino gets grant to expand reusable wine bottles into CA

byIsabella Burke
August 5, 2026

The Oregon-based startup will use the funding to build a commercial bottle-washing facility in Lompoc, California.

Load More
Next Post
ISRI: Export prohibition rule is dead in the water

ISRI: Export prohibition rule is dead in the water

2026 Buyers’ Guide

Equipment, services and technology suppliers serving the recycling industry.

Browse the Guide

More Posts

Two pilot programs in CA recycle commercial film

August 10, 2026
PureCycle sees easing headwinds to R-PP adoption

PureCycle says H2 outlook already playing out 

August 13, 2026
Ron Gonen

Bicameral Truth in Labeling Act introduced in Congress

August 10, 2026
Sabic launches engineered plastic with 75% PCR

Sabic launches engineered plastic with 75% PCR

August 11, 2026
Europe’s recyclers miss most of the critical materials

Market surge expected for plastic from e-scrap

August 10, 2026

What nine years of acquisitions taught Coastal Waste’s CEO

August 12, 2026
A Republic Services truck picks up a recycling cart in Fort Collins, Colorado.

Fort Collins, CO builds a roadmap to zero waste

August 6, 2026

New federal rule restricts black mass, tungsten scrap exports

August 5, 2026
Re-Teck opens site in Southeast Asia

ERI expands global footprint into Vietnam

August 11, 2026
Spinning globe with black background.

ITAD challenges, opportunities vary around the world

August 13, 2026
Load More

About & Publications

About Us

Staff

Archive

Magazine

Work With Us

Advertise
Jobs
Contact
Terms and Privacy

Newsletter

Get the latest recycling news and analysis delivered to your inbox every week. Stay ahead on industry trends, policy updates, and insights from programs, processors, and innovators.

Subscribe

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In

Add New Playlist

No Result
View All Result
  • The Latest
  • Analysis
  • Recycling
  • E-Scrap
  • Plastics
  • Policy Now
  • Conferences
    • E-Scrap Conference
    • Plastics Recycling Conference
    • Resource Recycling Conference
    • Textiles Recovery Summit
  • Magazine
  • About Us
  • Advertise
  • Archive
  • Jobs
  • Staff
Subscribe
This website uses cookies. By continuing to use this website you are giving consent to cookies being used. Visit our Privacy and Cookie Policy.