Resource Recycling
  • The Latest
  • Podcast
  • Analysis
    • All
    • Certification Scorecard
    • Industry Announcements
    • Opinion

    E-scrap feedstock competition mixed amid investments

    Open pit copper mine in Arizona.

    Trump touts aggressive US critical mineral goals

    From claims to custody: PCR procurement grows up

    Certification scorecard — week of Nov. 16

    Adam Gendell

    PET producers ride ‘local for local’ wave

    May pricing bullish for most bales

    HDPE resists seasonal, economic forces

    IT asset disposition and electronics recycling: Now and then

    Data center moratoriums cast development shadow

  • Conferences
    • Resource Recycling Conference
    • Plastics Recycling Conference
    • E-Scrap: The Longevity Conference
    • Textiles Recovery Summit
  • Publications
    • E-Scrap News
    • Plastics Recycling Update
    • Policy Now
    • Resource Recycling
    • Other Topics
      • All Topics
      • Brand Owners
      • Critical Minerals
      • Glass
      • Grant Watch / RFPs
      • Markets
      • Organics
      • Packaging
      • Research
      • Technology
      • Textiles
Subscribe
No Result
View All Result
Resource Recycling
  • The Latest
  • Podcast
  • Analysis
    • All
    • Certification Scorecard
    • Industry Announcements
    • Opinion

    E-scrap feedstock competition mixed amid investments

    Open pit copper mine in Arizona.

    Trump touts aggressive US critical mineral goals

    From claims to custody: PCR procurement grows up

    Certification scorecard — week of Nov. 16

    Adam Gendell

    PET producers ride ‘local for local’ wave

    May pricing bullish for most bales

    HDPE resists seasonal, economic forces

    IT asset disposition and electronics recycling: Now and then

    Data center moratoriums cast development shadow

  • Conferences
    • Resource Recycling Conference
    • Plastics Recycling Conference
    • E-Scrap: The Longevity Conference
    • Textiles Recovery Summit
  • Publications
    • E-Scrap News
    • Plastics Recycling Update
    • Policy Now
    • Resource Recycling
    • Other Topics
      • All Topics
      • Brand Owners
      • Critical Minerals
      • Glass
      • Grant Watch / RFPs
      • Markets
      • Organics
      • Packaging
      • Research
      • Technology
      • Textiles
Subscribe
No Result
View All Result
Resource Recycling
No Result
View All Result
Home Analysis

Hardware demand puts new focus on parts harvesting

byDavid Daoud
June 5, 2026
in Analysis, E-Scrap
Closeup of a printed circuitboard

Dario Lo Presti / Shutterstock

Editor’s note: Electronics recycling will be featured in sessions at the 2026 E-Scrap: The Longevity Conference in New Orleans October 26-28.

Electronics manufacturers are once again warning about tight supplies for parts that are deeply embedded in circuit boards. Some of those components are now quoted on months-long lead times and at clearly higher prices than a year ago. Capacitors and complex circuit boards are seeing these pressures, and some familiar decommissioned systems are becoming more interesting as sources of parts.

At the start of 2026, several major passive component suppliers, including KEMET (Yageo Group) and Panasonic, announced new rounds of price increases on tantalum capacitors and related products, citing stronger orders from high-end computing and networking customers. Distributor notices describe multiple hikes in less than a year, often in the 15–30% range for selected server-grade polymer tantalum lines. Industry coverage characterizes this as a global “tantalum capacitor rally,” with KEMET, AVX, Panasonic, and Vishay responding to tight supply and higher demand from AI-oriented hardware builds. Walsin and other Taiwanese passive component makers have also raised prices across related categories, including chip resistors and inductors, as the broader cost wave spreads through the supply chain.

A similar pattern is emerging in high-end multilayer ceramic capacitors, or MLCCs. These are the small ceramic blocks clustered around chips and power circuits on almost every board, where they smooth power and filter electrical noise. Recent analyses note that AI servers use 10 to 15 times more MLCCs than general-purpose servers, driven by higher power levels and more demanding power delivery networks. Suppliers report that high-grade MLCCs for AI, industrial, and automotive applications are seeing strong double-digit demand growth, and that manufacturers are considering or implementing targeted price increases as capacity gets tighter at the top end of the product mix.

On the interconnect side, printed circuit board and laminate producers are describing growing constraints in very high layer-count boards and the base materials that support them. Reports from printed circuit board (PCB) manufacturers and CCL suppliers point to longer lead times and capacity strain for boards used in AI servers, switches, and high-speed backplanes, as designs move to higher layer counts, tighter impedance control, and more advanced low-loss materials. High layer-count PCB manufacturing and advanced laminate availability now rank as a primary bottleneck in scaling AI-class infrastructure, not just a background process. Memory prices have also moved up in 2026, but for recyclers and refurbishers the notable change is that small passive parts and complex boards are now following similar tightening patterns.

For the reuse and recycling sector, the relevance lies in how this affects hardware that is already leaving production environments. The servers, storage systems, and switches being retired from data centers and enterprise networks were designed with many of the same tantalum-rich power sections, dense MLCC arrays, and high-layer boards that suppliers now describe as constrained. In earlier periods of oversupply, it often made sense to treat most of that material as either whole-unit resale or straightforward commodity scrap. That default approach can be revisited as specific components and board types move into tighter conditions.

One practical response is to introduce a more deliberate look at certain product families and configurations before they enter bulk processing. Rather than viewing a server or switch only as a resale candidate or a mixed-metal input, operators can identify which models are likely to contain boards populated with the components now under pressure, such as polymer tantalum banks on power supply boards, high-density MLCC clusters, or complex backplanes and mezzanines. Those boards can be removed and separated into a stream aimed at brokers, repair operations, and other intermediaries that are prepared to work with tested second-hand electronics. At the same time, buyers facing higher prices or extended delivery times on these parts may be more willing to discuss qualified used boards and modules when new material is constrained.

This does not require slowing all material or attempting to harvest every board. Most incoming equipment will still move best through established, high-throughput processes, and most components on a typical board will not suddenly become scarce or valuable. The focus is narrower. This means when external market signals clearly show that certain categories of capacitors and high-layer boards are in short supply, it can be worth taking a closer look at the incoming streams that contain them. A limited amount of targeted removal may be enough to capture the upside without disrupting overall operations.

For operators who already track incoming hardware by model and configuration, the remaining step is to connect that information with current component and PCB market conditions and to express it in simple work instructions. 

Where this goes from here

The conditions driving this cycle do not look like a short-term spike. AI infrastructure buildout is still in early stages and is likely to both accelerate and sustain over time as the tech refresh cycle velocity spikes. Tantalum ore supply is structurally constrained, and MLCC capacity expansions take years to come online. Barring a sharp pullback in data center investment, which no one is forecasting, the pressure on these component categories is more likely to persist through 2027 than to resolve in the next few quarters.

Looking at it through the lenses of the End-of-Life sector (recycling and reuse sector), it is worth noting that the hardware retired today was built when these parts were cheap and plentiful, meaning boards from 2020–2024 can carry component densities that are genuinely useful to the repair and broker market right now. That relevance fades as new equipment is designed with tighter bills of materials and alternative sourcing in mind. 

As in any market, none of this is guaranteed. Component markets have reversed before, sometimes quickly, and what looks like a sustained upcycle can soften if AI hardware demand shifts or if new capacity comes online faster than expected. The prudent read is that the current environment justifies a closer look at incoming streams, without betting the operation on prices staying elevated indefinitely.

Tags: ElectronicsTechnology
TweetShare
David Daoud

David Daoud

David Daoud is a contributor to Resource Recycling and E-Scrap News, covering IT asset disposition, electronics recycling, and circular IT governance. He is the founder of and current Principal Analyst at Compliance Standards LLC, where he conducts independent research and advisory work on ITAD markets, sustainability and ESG compliance, data security, and lifecycle risk management. Daoud has analyzed enterprise IT trends since the late 1990s and was among the first analysts to examine ITAD as a distinct market segment during his time at IDC. He advises operators, OEMs, and investment teams on regulatory, technology, and market developments affecting the electronics lifecycle.

Related Stories

The AI tsunami

The AI tsunami

byJim Puckett
November 19, 2026

AI data centers and the devices they make obsolete could generate 8.6 to 13.1 million metric tons of e-waste a...

Electronics on a desk.

Blancco launches AI ITAD assessment tool

byDavid Daoud
November 18, 2026

Circulate combines diagnostic results with customer-defined grading rules and resale estimates to guide disposition decisions.

Rumpke to invest $60M in Cincinnati MRF upgrade

Rumpke to invest $60M in Cincinnati MRF upgrade

byStefanie Valentic
November 17, 2026

Rumpke Waste & Recycling will spend $60 million to upgrade its Cincinnati-area materials recovery facility. The project adds optical sorters,...

Alphabet’s Materra wants recyclers to see molecules, not bottles

byStefanie Valentic
November 13, 2026

Alphabet’s moonshot factory has spent years building a molecular map of what Americans throw away. Its strategy lead says the...

Vessel gives excess inventory a second life

Vessel gives excess inventory a second life

byPaul Lane
November 13, 2026

The recently rebranded company helps manufacturers redistribute product more cheaply than destroying it.

Groups publish national recycling acceptance data

PC shipments slump as data center investment surges

byDavid Daoud
November 4, 2026

Global infrastructure industry presents a mixed outlook for ITAD, recycling companies.

Load More
Next Post
CalRecycle withdraws proposed regs for SB 54

Oceana, NRDC, CAW sue CalRecycle over SB 54 regs

2026 Buyers’ Guide

Equipment, services and technology suppliers serving the recycling industry.

Browse the Guide

More Posts

Closeup of PP with a chasing arrows recycling symbol.

PureCycle, WM sign rare 3-year bales contract

November 16, 2026

Goodwill eyes EPR revenue, starting with waste audit

November 12, 2026

Alphabet’s Materra wants recyclers to see molecules, not bottles

November 13, 2026
Adam Gendell

PET producers ride ‘local for local’ wave

November 16, 2026
Solarcycle, Korea Zinc merge in critical mineral venture

Solarcycle, Korea Zinc merge in critical mineral venture

November 18, 2026

E-scrap feedstock competition mixed amid investments

November 19, 2026
RecyClass hits 500 EU recyclability evals

EU PET import codes set to begin

November 18, 2026
The missing link in e-plastic recycling

The missing link in e-plastic recycling

October 28, 2026
NexPoint Materials to shutter Alabama plastics plant

NexPoint Materials to shutter Alabama plastics plant

November 4, 2026
Open pit copper mine in Arizona.

Trump touts aggressive US critical mineral goals

November 19, 2026
Load More

About & Publications

About Us

Staff
Job Listings

Archive

Magazines

Work With Us

Advertise
Contact
Terms and Privacy

Newsletters

Get the latest recycling news and analysis delivered to your inbox every week. Stay ahead on industry trends, policy updates, and insights from programs, processors, and innovators.

Subscribe

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In

Add New Playlist

No Result
View All Result
  • The Latest
  • Podcast
  • Analysis
  • Recycling
  • E-Scrap
  • Plastics
  • Policy Now
  • Conferences
    • E-Scrap Conference
    • Plastics Recycling Conference
    • Resource Recycling Conference
    • Textiles Recovery Summit
  • Magazines – Old
  • About Us
  • Advertise
  • Archive
  • Job Listings
  • Staff
Subscribe
This website uses cookies. By continuing to use this website you are giving consent to cookies being used. Visit our Privacy and Cookie Policy.