Metals companies are investing heavily in e-scrap recycling, with new facilities and expansion projects are planned or underway in North America, Europe and Asia. But one important question remains: Are these investments creating stronger competition for the electronic scrap that recyclers supply?
So far, the evidence is limited.
The scale of the opportunity is substantial. The UN’s Global E-waste Monitor estimates that 62 million metric tons of electronic waste were generated worldwide in 2022, but only 22.3% was documented as formally collected and recycled. Global generation is projected to reach 82 million metric tons by 2030. Europe recorded a 42.8% documented collection and recycling rate, compared with substantially lower rates in several other regions. These figures help explain why metals companies are investing in recovery infrastructure.
The regional picture is uneven. The United States has a substantial ITAD, electronics collection and preprocessing industry, but fewer domestic outlets capable of processing complex electronic scrap into recovered metals. Europe and parts of Asia have more established networks of integrated smelters and specialist refiners. As a result, US recyclers remain dependent in part on Canadian and overseas facilities for downstream recovery.
A forthcoming report from Compliance Standards LLC, “Global E-Scrap Refining: Capacity Expansion, Recovery Economics and the 2027 Outlook,” examines 11 major smelters, refiners and materials companies. It finds that processing capacity is expanding, but publicly reported intake volumes remain mostly flat or modestly higher. Available information also offers little indication that suppliers are receiving better commercial terms.
Instead, an important competitive shift is taking place earlier in the supply chain. Metals companies are investing in collection networks, recycling businesses, sampling facilities and preprocessing operations to secure access to material before it reaches their smelters.
Capacity across three continents
Several major investments illustrate the industry’s direction. Aurubis is ramping up its Richmond, Georgia, secondary smelter, which is designed to process about 180,000 metric tons annually of complex recycling materials, including e-scrap. The project has experienced delays, with its two phases now set to wrap up in fiscal 2026/27 and 2027/28.
In Spain, Atlantic Copper inaugurated its CirCular facility in September 2026. The plant is designed to process about 60,000 metric tons annually of preprocessed nonferrous material from discarded electrical and electronic equipment. It will recover copper, gold, silver, palladium, platinum, tin and nickel.
Neither company had immediately disclosed actual e-scrap processing volumes.
Umicore has committed €450 million ($494.9 million) to expand precious-metals refining at its Hoboken complex in Belgium. The investment will improve feedstock flexibility and increase recovery capabilities for metals including tin, antimony and cobalt. Commissioning is planned for 2030.
In Japan, Mitsubishi Materials is expanding e-scrap processing capacity at its Naoshima smelter by about 30%. The work will require reduced processing during the first quarter of 2027.
These investments represent significant additions to the industry’s potential recovery capacity. But planned capacity and actual material processed are two different measures.
Concentrate economics add pressure
The investments are taking place against a difficult background for traditional copper smelting. The 2026 annual benchmark treatment charge for copper concentrates — the fee that mines pay smelters for processing each metric ton of concentrate — fell to zero, from $21.25 per metric ton in 2025. Boliden reported spot treatment charges reaching minus $297 per metric ton at the end of September.
Treatment charges are payments smelters traditionally receive from miners for processing copper concentrates. Their decline has put pressure on conventional smelting economics.
This makes alternative feedstocks, including e-scrap, strategically important. However, the available evidence does not establish that smelters are paying more to obtain them.
Boliden reported 18,257 metric tons of electronics and alloys feed at its Rönnskär smelter in the third quarter, down 1.8% year over year.
Aurubis reported that its intake of other recycling materials, a category that includes electronic scrap and several other secondary materials, declined 3% during the first nine months of its fiscal year. The company also held refining charges for these materials constant.
DOWA Holdings provided a different signal, reporting a roughly 8% increase in recycling-material intake at its Kosaka operation during the first half of its fiscal year.
The figures are not directly comparable because the companies use different definitions and reporting periods. Nevertheless, they do not demonstrate a widespread shortage of e-scrap, and none of the companies reviewed publicly discloses its e-scrap purchasing payables.
Moving closer to the source
Some of the most interesting developments involve companies taking a more direct role in collecting and sourcing material.
Korea Zinc has assembled a US network connecting electronics recycling operations through its PedalPoint businesses, alongside scrap trading through Kataman. The company projected that this network would supply 14,000 metric tons of its 2026 copper output. That network was bolstered by a merger between PedalPoint and Solarcycle this week.
Mitsubishi Materials acquired a 19% voting stake in Elemental USA E-Waste & ITAD, with the possibility of increasing its interest to 49% through preferred-share conversion.
JX Advanced Metals has a presence in Canadian electronics recycling through eCycle Solutions and has invested in Renet Japan’s nationwide collection network.
Glencore operates sampling facilities in Rhode Island and California, connecting precious-metal-bearing electronics to its Horne smelter in Quebec.
These moves give metals companies closer relationships with suppliers and greater control over material quality, sampling and preprocessing.
For independent recyclers, the implications are important. Companies with established downstream relationships may have advantages in securing processing outlets. But it remains unclear whether these arrangements are leading to better prices for suppliers.
Regional differences
North America illustrates the difference between electronics recycling activity and downstream refining capacity. The United States has an established ITAD and collection industry, but fewer domestic smelter-backed outlets for complex E-Scrap. Glencore’s Horne facility remains an important destination for US-sourced material, while Aurubis Richmond is developing another domestic option. Its ramp-up has been extended, and its copper blister is sent to Europe for further refining.
Europe has a more established refining network, with major investments underway in Germany, Belgium and Spain. New waste-shipment rules are also changing how recyclable materials move across borders.
Japan and South Korea are pursuing closer integration between collection, preprocessing and smelting. However, planned maintenance and equipment problems at Japanese facilities could constrain available outlets in early 2027.
China presents a different situation. It prohibits solid-waste imports but allows certain recycled copper and brass materials that meet national standards. These distinctions are important when assessing potential export markets for e-scrap.
What to watch in 2027
The most likely near-term development is a gradual increase in processing capacity, rather than an immediate scramble for available electronic scrap. Three indicators will help determine whether that assessment changes:
- Actual intake: Whether new facilities begin reporting meaningful processing volumes.
- Commercial terms: Whether refiners reduce charges or improve payable percentages for suppliers.
- Collection and sourcing: Whether companies expand their ownership and partnerships with electronics recyclers and pre-processors.
For electronics recyclers, expanding processing capacity creates more potential outlets for recovered materials. The commercial benefit will hinge on the terms refiners offer and the value they assign to each material stream.
The industry’s next phase will be shaped by how quickly new facilities come online, how successfully they secure feedstock and how much of the resulting value reaches the companies collecting and preparing discarded electronics.
The findings are drawn from Compliance Standards’ ongoing research into 11 major metals and materials companies. Its forthcoming CS Metals Recovery Intelligence service will provide quarterly assessments, regional analysis and individual company scorecards.






















