Resource Recycling
  • The Latest
  • Podcast
  • Analysis
    • All
    • Certification Scorecard
    • Industry Announcements
    • Opinion
    From claims to custody: PCR procurement grows up

    Certification scorecard — week of Nov. 16

    Adam Gendell

    PET producers ride ‘local for local’ wave

    May pricing bullish for most bales

    HDPE resists seasonal, economic forces

    IT asset disposition and electronics recycling: Now and then

    Data center moratoriums cast development shadow

    Recycling tracking data is already on your truck

    Recycling tracking data is already on your truck

    A five star ranking with one under a microscope

    Certification scorecard — week of Nov. 9

  • Conferences
    • Resource Recycling Conference
    • Plastics Recycling Conference
    • E-Scrap: The Longevity Conference
    • Textiles Recovery Summit
  • Publications
    • E-Scrap News
    • Plastics Recycling Update
    • Policy Now
    • Resource Recycling
    • Other Topics
      • All Topics
      • Brand Owners
      • Critical Minerals
      • Glass
      • Grant Watch / RFPs
      • Markets
      • Organics
      • Packaging
      • Research
      • Technology
      • Textiles
Subscribe
No Result
View All Result
Resource Recycling
  • The Latest
  • Podcast
  • Analysis
    • All
    • Certification Scorecard
    • Industry Announcements
    • Opinion
    From claims to custody: PCR procurement grows up

    Certification scorecard — week of Nov. 16

    Adam Gendell

    PET producers ride ‘local for local’ wave

    May pricing bullish for most bales

    HDPE resists seasonal, economic forces

    IT asset disposition and electronics recycling: Now and then

    Data center moratoriums cast development shadow

    Recycling tracking data is already on your truck

    Recycling tracking data is already on your truck

    A five star ranking with one under a microscope

    Certification scorecard — week of Nov. 9

  • Conferences
    • Resource Recycling Conference
    • Plastics Recycling Conference
    • E-Scrap: The Longevity Conference
    • Textiles Recovery Summit
  • Publications
    • E-Scrap News
    • Plastics Recycling Update
    • Policy Now
    • Resource Recycling
    • Other Topics
      • All Topics
      • Brand Owners
      • Critical Minerals
      • Glass
      • Grant Watch / RFPs
      • Markets
      • Organics
      • Packaging
      • Research
      • Technology
      • Textiles
Subscribe
No Result
View All Result
Resource Recycling
No Result
View All Result
Home Plastics

Microwaves and mobility mark plastics-to-fuel effort

Colin StaubbyColin Staub
April 26, 2017
in Plastics
Microwaves and mobility mark plastics-to-fuel effort

A startup is using microwave technology in an innovative conversion process that allows for small units that can be sold to large plastics generators and other stakeholders.

California-based Resynergi is developing the technology into a modular product, breaking away from the traditional plastics-to-fuel model of operating a large conversion plant. The company is looking to sell its microwave system to a range of buyers, such as big box stores and manufacturers.

Resynergi’s product can be customized based on how much capacity a customer needs. For a unit that can process a ton of material a day, the company plans to charge about $300,000 to $350,000. For system with a 2 ton daily capacity, the cost would be twice that. The aim is to release the product late this year.

“Our first targets are really commercial customers who have a couple streams of material, and in some cases they’re isolated or they’re paying tipping fees to get rid of these materials,” company co-founder Jason Tanne said. “But there really isn’t a limit to who our customers will be or who will use this.”

Targeting PP and PE streams

The company launched about a year ago and has been working to develop a different approach to providing the heat source necessary for plastics-to-fuel conversion.

The company’s Evolucient CMAP (Continuous Microwave Assisted Pyrolysis) 1 Continuous Pyrolysis System accepts PP and PE streams that currently are not often mechanically recycled. The materials enter the system as solid plastics and go through an extrusion process. At that point, the technology deviates from normal plastics-to-fuel processes, said Tanne, who co-founded the company along with Brian Bauer.

“Most companies use more traditional heating methodologies, whether they’re radiated heat through gas or some kind of heater system, to take materials from a solid state into a liquid and then into a gas,” Tanne said.

Instead, Resynergi’s system fires microwaves into a reactor vessel, which begins breaking up the carbon chains in the plastics “almost instantaneously,” Tanne said. That’s because microwave energy can create volumetric heat, evenly heating the materials and increasing temperatures faster than indirect heating methods.

“You’re not radiating from outside the vessel, you’re actually firing from inside and cooking these materials, for lack of a better term,” Tanne said. “Because of that it takes milliseconds, or maybe microseconds, to take the material from either a solid or a liquid through a phase change into gas.”

As the material changes state, its carbon chains are broken down, and are either condensed into fuel or can be used for energy production in a generator system.

The system’s output is about 80 percent diesel and 20 percent other materials – lighter elements like naphtha, with some heavier oil mixed in as well.

The diesel output is essentially an ASTM-grade diesel or diesel equivalent product, generally sulfur-free, with a fairly high cetane level, Tanne said. However, it differs from a refinery product in that the fuel would have no preservatives, which are added during commercial refining.

“The goal is you’d be able to put it in a diesel engine without any issue,” Tanne said.

The system yields about 90 percent of the weight of PP and PE that’s fed into it. The ratio for plastic converted to fuel through the Resynergi system is about 1000 liters per ton of feedstock.

Fits onto a trailer

The microwave method means the whole system can take place in a smaller physical vessel. “It’s a piece of equipment in a small frame. It’ll fit on an 18-foot trailer if you want,” he said.

The equipment is powered entirely by electricity, and because the microwave energy generates heat internally without having to heat through the vessel walls, energy costs are fairly low, Tanne said. He estimated the system uses about half a kilowatt of energy to take one kilogram of plastic and convert it into roughly one liter of fuel.

Assuming the output fuel generates about 3.5 kilowatts of power in a standard diesel generator, Tanne noted the system can sustain itself using about one-sixth of the total power output. Counting the purchase and operating costs, the company estimates a payback period of about a year and a half. That figure assumes a 1- to 5-tons-per-day system module running about 90 percent of the time. It also assumes the operator is able to charge a tipping fee to other feedstock suppliers – plastics-to-fuel operators often charge less than a landfill tipping fee to accept discarded plastics.

The lower costs and energy consumption may make this technology economically viable at a time of low oil prices, which have stymied other sector players.

Resynergi, which has California and Washington offices and was recently profiled in the North Bay Business Journal, has received several orders for its product. The company aims to send out pilot systems toward the end of summer. Assuming the tests go well, the 1- and 2-ton per day models would be released late in the year. Under that schedule, the 5-ton capacity versions would follow shortly after.

 

Erema Van Dyk

Tags: Chemical RecyclingEquipmentManufacturersTechnology
TweetShare
Colin Staub

Colin Staub

Colin Staub was a reporter and associate editor at Resource Recycling until August 2025.

Related Stories

Electronics on a desk.

Blancco launches AI ITAD assessment tool

byDavid Daoud
November 18, 2026

Circulate combines diagnostic results with customer-defined grading rules and resale estimates to guide disposition decisions.

Rumpke to invest $60M in Cincinnati MRF upgrade

Rumpke to invest $60M in Cincinnati MRF upgrade

byStefanie Valentic
November 17, 2026

Rumpke Waste & Recycling will spend $60 million to upgrade its Cincinnati-area materials recovery facility. The project adds optical sorters,...

Closeup of PP with a chasing arrows recycling symbol.

PureCycle, WM sign rare 3-year bales contract

byAntoinette Smith
November 16, 2026

CEO Dustin Olson said the contract built on a relationship in which PureCycle has been a reliable buyer, and is...

Alphabet’s Materra wants recyclers to see molecules, not bottles

byStefanie Valentic
November 13, 2026

Alphabet’s moonshot factory has spent years building a molecular map of what Americans throw away. Its strategy lead says the...

Vessel gives excess inventory a second life

Vessel gives excess inventory a second life

byPaul Lane
November 13, 2026

The recently rebranded company helps manufacturers redistribute product more cheaply than destroying it.

Data centers and AI combine to create ITAD ‘growth engine’

Component shortages drive demand for data center hardware

byDavid Daoud
November 10, 2026

Google, Microsoft and Sims Lifecycle Services report longer equipment lifecycles and growing demand for refurbished components, while rising asset values...

Load More
Next Post
E-plastics explained

E-plastics explained

2026 Buyers’ Guide

Equipment, services and technology suppliers serving the recycling industry.

Browse the Guide

More Posts

Closeup of PP with a chasing arrows recycling symbol.

PureCycle, WM sign rare 3-year bales contract

November 16, 2026

Goodwill eyes EPR revenue, starting with waste audit

November 12, 2026
PureCycle sees easing headwinds to R-PP adoption

PureCycle shifts focus, secures feedstock

November 5, 2026
Artificial intelligence is altering the marketplace for ITAD providers in numerous ways. | Shutterstock

AI alters ITAD economics

November 3, 2026

Alphabet’s Materra wants recyclers to see molecules, not bottles

November 13, 2026
Modern Mining raises $40 million in IPO

Modern Mining raises $40 million in IPO

November 12, 2026
NexPoint Materials to shutter Alabama plastics plant

NexPoint Materials to shutter Alabama plastics plant

November 4, 2026
The missing link in e-plastic recycling

The missing link in e-plastic recycling

October 28, 2026
PET bottles for recycling

PET imports reshape US markets as demand grows

November 11, 2026
IT asset disposition and electronics recycling: Now and then

Data center moratoriums cast development shadow

November 12, 2026
Load More

About & Publications

About Us

Staff
Job Listings

Archive

Magazines

Work With Us

Advertise
Contact
Terms and Privacy

Newsletters

Get the latest recycling news and analysis delivered to your inbox every week. Stay ahead on industry trends, policy updates, and insights from programs, processors, and innovators.

Subscribe

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In

Add New Playlist

No Result
View All Result
  • The Latest
  • Podcast
  • Analysis
  • Recycling
  • E-Scrap
  • Plastics
  • Policy Now
  • Conferences
    • E-Scrap Conference
    • Plastics Recycling Conference
    • Resource Recycling Conference
    • Textiles Recovery Summit
  • Magazines – Old
  • About Us
  • Advertise
  • Archive
  • Job Listings
  • Staff
Subscribe
This website uses cookies. By continuing to use this website you are giving consent to cookies being used. Visit our Privacy and Cookie Policy.